Make sure to call us at 484-BUY-BOAT(289-2628) for current or upcoming inventory

Additional options available when placing online orders. See order form for options.

18′ Barracuda Full Build-out

L.O.A. 18.04’
B.O.A. 5.18’
H.O.A. 2.26’
Load 1694 lbs
Max. Hp. 60 HP with 4-stroke
Approx. weight 1,100 lb.
Transom height 20″

$18,237 Base price

Price includes the following but does not include an engine or trailer.
Please refer to the Engine/Trailer tab.

 All export/import costs

  • USCG capacity plate
  • Full floor
  • Anchor locker
  • Splash well
  • Positive Flotation
  • White interior
  • Rigging tubes for console
  • Console with front seat that holds fuel tank and battery
  • Foldup leaning post with 2 rod holders
  • 12 gallon fuel system
  • 2” Rub Rail
  • Navigation lights
  • 1500gph bilge system
  • Baitwell kit/pump plumbed
  • 4 trolling rod holders in stern
  • 4 stainless cleats
Order 18' Barracuda

How do I order?

Place your order below, selecting the options you want. We will contact you with the final invoice for approval and at that time a 30% deposit of the invoice total in the form of cashier’s check or bank wire is due to hold a boat in your name or begin your build at the factory.

When your boat arrives in Orlando Florida, 30% of the balance is due (paid by check, cashiers check or wire transfer). Final balance is due (paid by cashiers check or wire transfer) at boat pickup.

18′ Corvina with Flat Casting Bow (Recommended with tiller engine)

L.O.A. 18.04’
B.O.A. 5.18’
H.O.A. 2.26’
Load 1694 lb.
Max. Hp. 60 HP with 4-stroke
Approx. weight 1,100 lb. without engine
Transom height 20″

$16,330 Base price with 20″ transom

Price includes the following but does not include an engine or trailer.
Please refer to the Engine/Trailer tab.

 All export/import costs

  • USCG capacity plate
  • Full floor
  • Flat bow locker
  • Splash well
  • White interior
  • Stern bench with fold up seat and 2 rod holders
  • Aluminum grabrail that fits cooler.
  • 2” Rub rail
  • Switch panel on front of splash well
  • Navigation lights
  • 1500gph bilge system
  • Baitwell pump plumbed
  • 4 trolling rod holders in stern
  • 4 stainless cleats
Order 18' Corvina with Flat Casting Bow

How do I order?

Place your order below, selecting the options you want. We will contact you with the final invoice for approval and at that time a 30% deposit of the invoice total in the form of cashier’s check or bank wire is due to hold a boat in your name or begin your build at the factory

When your boat arrives in Orlando Florida, 30% of the balance is due (paid by check, cashiers check or wire transfer). Final balance is due (paid by cashiers check or wire transfer) at boat pickup.

22.5′ Corvina Bare Hull Specs

LOA: 22.50′
BOA: 6.2′
HOA: 3.08′
Max Load 2,310 lbs without engine
Max HP: 150hp 4-stroke
Approx. weight 847 without engine
Transom height: 20”

$13,686 Base price with 20” transom
$13,618 Base price with 25” transom.

Price includes the following but does not include an engine or trailer.
Please refer to the Engine/Trailer tab.

 All export/import costs

  • Bilge pump system 1500gph
  • Baitwell Kit (pump and valve plumbed)
  • Navigation lights
  • Electrical panel installed on front of splash well
  • 2″ Rub rail
  • 4 Stainless steel cleats 6″
  • Anchor locker
  • Splash well
  • Choice of exterior color
  • Factory gray interior
  • USCG capacity plate.
Order 22.5′ Corvina Bare Hull

How do I order?
Place your order below, selecting the options you want. We will contact you with the final invoice for approval and at that time a 30% deposit of the invoice total in the form of cashier’s check or bank wire is due to hold a boat in your name or begin your build at the factory

When your boat arrives in Orlando Florida, 30% of the balance is due (paid by check, cashiers check or wire transfer). Final balance is due (paid by cashiers check or wire transfer) at boat pickup.

22.5′ Corvina Full Build-out Specs

LOA: 22.50′
BOA: 6.2′
HOA: 3.08′
Approx. weight 1,299 lbs without engine
Max HP: 150hp 4-stroke
Transom height: 20”

$23,548 with 20” transom.
$23,731 with 25” transom.

Price includes the following but does not include an engine or trailer.
Please refer to the Engine/Trailer tab.

  • Full floor and fuel hatch.
  • All export/import costs
  • 41-gallon fuel system
  • Leaning post with seat storage, 4 rod holders and footrest
  • 4 Stainless steel cleats
  • Barracuda console with windshield and front padded seat with storage
  • Rigging tubes for console
  • Navigation lights
  • 1500gph bilge system
  • Baitwell kit/pump plumbed
  • 4 trolling rod holders in stern
  • Basic electrical system
  • Engine kit switch
  • USCG capacity plate.

Order 22.5′ Corvina Full Build-out

How do I order?
Place your order below, selecting the options you want. We will contact you with the final invoice for approval and at that time a 30% deposit of the invoice total in the form of cashier’s check or bank wire is due to hold a boat in your name or begin your build at the factory

When your boat arrives in Orlando Florida, 30% of the balance is due (paid by check, cashiers check or wire transfer). Final balance is due (paid by cashiers check or wire transfer) at boat pickup.

255V Corvina Full Build-out Specs

L.O.A. 25.7′
B.O.A. 6.49′
H.O.A. 3.64′
Load 3086 lb
Max. Hp. 200hp with 4-stroke
Transom height 25″

$27,371 with 20” transom.
$27,524 with 25” transom.

Price includes the following but does not include an engine or trailer.
Please refer to the Engine/Trailer tab.

All export/import costs

  • Full floor and fuel hatch
  • 45-gallon fuel system
  • Leaning post with seat storage, 4 rod holders and footrest
  • 4 Stainless steel cleats
  • 4 trolling rod holders in stern
  • Barracuda console with windshield and front padded seat with storage
  • Acrylic windshield
  • Baitwell kit/pump installed
  • Navigation lights Gunwale mounted
  • 1500gph bilge system
  • Basic electrical system
  • Engine kit switch 1 battery 1 engine
  • Pipe center console and fuel system
  • USCG capacity plate.
Order 255V′ Corvina Full Build-out

How do I order?

Place your order below, selecting the options you want. We will contact you with the final invoice for approval and at that time a 30% deposit of the invoice total in the form of cashier’s check or bank wire is due to hold a boat in your name or begin your build at the factory

When your boat arrives in Orlando Florida, 30% of the balance is due (paid by check, cashiers check or wire transfer). Final balance is due (paid by cashiers check or wire transfer) at boat pickup.

22.5′ Corvina with Flat Casting Bow (Recommended with tiller engine)

L.O.A. 22.50’
B.O.A. 6.20’
H.O.A. 3.08’
Load 2310 lb.
Max. Hp. 150 HP with 4-stroke
Approx. weight 1,299 lb.
Transom height 20”

$19,986 Base price with 25″ transom

Price includes the following but does not include an engine or trailer.
Please refer to the Engine/Trailer tab.

 All export/import costs

  • USCG capacity plate
  • Full floor
  • Flat bow locker
  • Splash well
  • White interior
  • Stern bench with fold up seat and 2 rod holders
  • Aluminum grabrail that fits cooler.
  • 2” Rub rail
  • Switch panel on front of splash well
  • Navigation lights
  • 1500gph bilge system
  • Baitwell pump plumbed
  • 4 trolling rod holders in stern
  • 4 stainless cleats
Order 22.5' Corvina with Flat Casting Bow

How do I order?

Place your order below, selecting the options you want. We will contact you with the final invoice for approval and at that time a 30% deposit of the invoice total in the form of cashier’s check or bank wire is due to hold a boat in your name or begin your build at the factory

When your boat arrives in Orlando Florida, 30% of the balance is due (paid by check, cashiers check or wire transfer). Final balance is due (paid by cashiers check or wire transfer) at boat pickup.

25′ Corvina Bare Hull Specs

L.O.A. 25.26’
B.O.A. 6.43’
H.O.A. 3.35’
Load 3080 lbs
Max. Hp. 200 HP 4-stroke
Approx. weight 915 lb. without engine
Transom height 20″ or 25″

$13,751 Base price with 20” transom
$14,065 Base price with 25” transom

Price includes the following but does not include an engine or trailer.
Please refer to the Engine/Trailer tab. 

 All export/import costs

  • Bilge pump system 1500gph
  • Baitwell Kit (pump and valve plumbed)
  • Navigation lights
  • Electrical panel installed on front of splash well
  • 2″ Rub rail
  • 4 Stainless steel cleats
  • Anchor locker
  • Splash well
  • Choice of exterior color
  • Factory gray interior
  • USCG capacity plate
Order 25′ Corvina Bare Hull

How do I order?
Place your order below, selecting the options you want. We will contact you with the final invoice for approval and at that time a 30% deposit of the invoice total in the form of cashier’s check or bank wire is due to hold a boat in your name or begin your build at the factory

When your boat arrives in Orlando Florida, 30% of the balance is due (paid by check, cashiers check or wire transfer). Final balance is due (paid by cashiers check or wire transfer) at boat pickup.

25′ Corvina Full Build-out Specs

L.O.A. 25.26’
B.O.A. 6.43’
H.O.A. 3.35’
Load 3080 lb.
Max. Hp. 200 HP 4-stroke
Approx. weight 1,442 lbs without engine
Transom height 20″ or 25″

$27,159 Base price with 20” transom.
$27,233 Base price with 25” transom

Price includes the following but does not include an engine or trailer. 
Please refer to the Engine/Trailer tab.

  • All export/import costs
  • Full floor and fuel hatch
  • 45-gallon fuel system
  • Leaning post with seat storage, 4 rod holders and footrest
  • 4 Stainless steel cleats
  • Barracuda console with windshield and front padded seat with storage
  • Rigging tubes for console
  • Navigation lights
  • 1500gph bilge system
  • Baitwell kit/pump plumbed
  • 4 trolling rod holders in stern
  • Basic electrical system
  • Engine kit switch
  • USCG capacity plate

 

Order 25′ Corvina Full Build-out

How do I order?
Place your order below, selecting the options you want. We will contact you with the final invoice for approval and at that time a 30% deposit of the invoice total in the form of cashier’s check or bank wire is due to hold a boat in your name or begin your build at the factory

When your boat arrives in Orlando Florida, 30% of the balance is due (paid by check, cashiers check or wire transfer). Final balance is due (paid by cashiers check or wire transfer) at boat pickup.

28′ Corvina Bare Hull Specs

L.O.A. 27.85’
B.O.A. 7.58’
H.O.A. 3.67’
Load 4180 lb.
Max. Hp. 300 HP with 4-stroke
Approx. weight 1760 lbs’ without engine
Transom height 25″

$21,097 Base price with 25” transom.

Price includes the following but does not include an engine or trailer.
Please refer to the Engine/Trailer tab.

 All export/import costs

  • Bilge pump system 1500gph
  • Baitwell Kit (pump and valve plumbed)
  • Navigation lights
  • Electrical panel installed on front of splash well
  • 2″ Rub rail
  • 4 Stainless steel cleats 6″
  • 4 Trolling rod holders in stern
  • Anchor locker
  • Splash well
  • Choice of exterior color
  • Factory gray interior
  • USCG capacity plate
Order 28′ Corvina Bare Hull

How do I order?
Place your order below, selecting the options you want. We will contact you with the final invoice for approval and at that time a 30% deposit of the invoice total in the form of cashier’s check or bank wire is due to hold a boat in your name or begin your build at the factory

When your boat arrives in Orlando Florida, 30% of the balance is due (paid by check, cashiers check or wire transfer). Final balance is due (paid by cashiers check or wire transfer) at boat pickup.

28′ Corvina Full Build-out Specs

L.O.A. 27.85’
B.O.A. 7.58’
H.O.A. 3.67’
Load 4180 lb.
Max. Hp. 300 HP with 4-stroke
Approx. weight 2524 lbs without engine
Transom height 25″

$34,617 Base price with 25” transom.

Price includes the following but does not include an engine or trailer.
Please refer to the Engine/Trailer tab.

 All export/import costs

  • Full floor and fuel hatch
  • 63 gallon fuel system
  • Leaning post with seat storage, 4 rod holders and footrest
  • 4 Stainless steel cleats
  • Barracuda console with windshield and front padded seat with storage
  • Rigging tubes for console
  • Navigation lights
  • 1500gph bilge system
  • Baitwell kit/pump plumbed
  • 4 trolling rod holders in stern
  • Basic electrical system
  • Engine kit switch
  • USCG capacity plate
Order 28′ Corvina Full Build-out

How do I order?
Place your order below, selecting the options you want. We will contact you with the final invoice for approval and at that time a 30% deposit of the invoice total in the form of cashier’s check or bank wire is due to hold a boat in your name or begin your build at the factory

When your boat arrives in Orlando Florida, 30% of the balance is due (paid by check, cashiers check or wire transfer). Final balance is due (paid by cashiers check or wire transfer) at boat pickup.

32′ Corvina Bare Hull Specs

L.O.A. 32.34’
B.O.A. 8.07’
H.O.A. 4.43’
Load 7040 lb.
Max. Hp. 2 X 200hp 4-stroke
Approx. weight 2255 without engine
Transom height 25″

$25,250 Base price with 25” transom.

Price includes the following but does not include an engine or trailer.
Please refer to the Engine/Trailer tab.

 All export/import costs

  • USCG capacity plate
  • Anchor locker
  • Splash well
  • Navigation lights
  • 2” Rub rail
  • 1500gph bilge system
  • Baitwell kit/pump plumbed
  • 4 trolling rod holders in stern
  • 4 Stainless steel cleats
  • USCG capacity plate
Order 32′ Corvina Bare Hull

How do I order?
Place your order below, selecting the options you want. We will contact you with the final invoice for approval and at that time a 30% deposit of the invoice total in the form of cashier’s check or bank wire is due to hold a boat in your name or begin your build at the factory

When your boat arrives in Orlando Florida, 30% of the balance is due (paid by check, cashiers check or wire transfer). Final balance is due (paid by cashiers check or wire transfer) at boat pickup.

32′ Corvina Full Build-out Specs

L.O.A. 32.34’
B.O.A. 8.07’
H.O.A. 4.43’
Load 7054 lb.
Max. Hp. 2 X 2250hp 4-stroke
Approx. weight 2260 without engines
Transom height 25″

Price includes the following but does not include an engine or trailer.
Please refer to the Engine/Trailer tab.

  • All export/import costs
  • Self-bailing floor
  • 240 gallon fuel system under the deck
  • Bilge access with hatches
  • Flat bow and anchor compartment
  • Center console with interior light
  • Windshield with 4 courtesy lights
  • Basic flotation
  • Leaning post with foldable seat, 4 rod holders and 2 cup holders
  • 2 – 2000gph bilge pump
  • Nav lights
  • Basic electrical system.
  • Navigation lights
  • USCG capacity plate
Order 32′ Corvina Full Build-out

How do I order?
Place your order below, selecting the options you want. We will contact you with the final invoice for approval and at that time a 30% deposit of the invoice total in the form of cashier’s check or bank wire is due to hold a boat in your name or begin your build at the factory

When your boat arrives in Orlando Florida, 30% of the balance is due (paid by check, cashiers check or wire transfer). Final balance is due (paid by cashiers check or wire transfer) at boat pickup.